cyclone

EX PAINT VAPOUR EXTRACTION SYSTEM

PRODUCT CODE : SAPVES

ATEX IECEx UKEX INMETRO zone-1-2 madeinuk

The SA CYCLONE Paint Vapour Extraction System is a unique, fully EX compliant, modular and portable extraction solution for use when carrying out painting and coating operations on site.

Share This:

Downloads

  • DATASHEET
  • ATEX CERTIFICATE
  • UKEX CERTIFICATE
  • IECEX CERTIFICATE
  • INMETRO CERTIFICATE

This product is also available for rental! (UK Only)

Want to find out more?

Visit Now
SKU: SAPVES Category:
  • SA CYCLONE Paint Vapour Extraction System is a unique, fully EX compliant, modular and portable extraction solution for use when carrying out painting and coating operations on site.cyclone

    EX Paint Vapour Extraction System 30cm

    PRODUCT CODE: SAPVES-30

    Clear
    - +
  • SA CYCLONE Paint Vapour Extraction System is a unique, fully EX compliant, modular and portable extraction solution for use when carrying out painting and coating operations on site.cyclone

    EX Paint Vapour Extraction System 40cm

    PRODUCT CODE: SAPVES-40

    Clear
    - +

The SA CYCLONE Paint Vapour Extraction System is a unique, fully EX compliant, modular and portable extraction solution for use when carrying out painting and coating operations on site. The main Air Mover is EX type certified to ATEX, IECEX, UKEX and INMETRO standards for Zones 1 and 2 and all the other elements of the system are fully EX compliant including having Ignition Risk Assessments. All materials are antistatic with the facility to static bond and ground the entire system which removes the risk of any static build up. The result is a highly mobile, highly effective and completely safe system of paint vapour removal.

The system has the capability to extract up to 2500 cubic metres of contaminated air/vapours per hour. The extracted fumes are put through a 3 stage filtration process – 2 stages of particulate filtration which filters out particles down to 1 micron and below, followed by activated carbon filtration which removes the vapours. Clean, breathable air is then expelled.

The filtration unit incorporates a flow indicator which shows when the particulate filters are needing to be changed.

The system is available in 110V or 230V options and is supplied with everything you need to set up a system, including a set of filters. Additional filter bundles and individual filters are available from stock

SA CYCLONE Paint Vapour Extraction System is a unique, fully EX compliant, modular and portable extraction solution for use when carrying out painting and coating operations on site.
Construction
High quality stainless steel with polymer duct connector
Design
Hinged lid with safety stays allowing easy access, heavy duty swivel wheels for mobility
Filter System
First stage G4 panel filter
Second stage bag filter (depending on variant)
Third stage carbon cartridge filter (depending on variant)
Filter Size
592mm x 592mm
Ducting Attachment
Can be configured to suit 30cm or 40cm ducting
Free Airflow (with 30cm Connectors)
2500m3/hr, pressure drop 340pa
Free Airflow (with 40cm Connectors)
2500m3/hr, pressure drop 300pa
Dimensions
1150mm(l) x 730mm(w) x 740mm(h)
Weight (without carbon filters)
50kg
Weight (with carbon filters)
100kg
CERTIFICATION
Ex II 2 G
Ex db eb h IIB+H2 T4 Gb
INGRESS PROTECTION
IP66
OPERATING TEMPERATURE
Ta -40°C to +55°C
RUN TIME
Continuous
MOTOR PROTECTION
Thermal cut-out
FAN CASING
Anti-static polyethylene
Flame retardant & chemical resistant
CABLE LENGTH
10m (or as required)
VOLTAGE OPTIONS
110VAC
230VAC
FREE AIRFLOW – 30CM VERSION (Independently tested)
1953cfm (3319 m³/hr) @50Hz
2185cfm (3712 m³/hr) @60Hz
FREE AIR FLOW – 40CM VERSION (Independently tested)
2683cfm (4559 m³/hr) @50Hz
3048cfm (5179 m³/hr) @60Hz
START UP CURRENT
110V: 50Hz: 21A, 60Hz: 17A
230V: 50Hz: 12A, 60Hz: 12A
RUN CURRENT
110V: 50Hz: 6A, 60Hz: 7A
230V: 50Hz: 3A, 60Hz: 5A
DIMENSIONS
458 x 349 x 590mm (l x w x h)
with adaptors 458 x 498 x 590mm (l x w x h)
WEIGHT
22kg
NOISE LEVEL @ 1 METRE
78dBA – 50Hz
81dBA – 60Hz
Duct Fixing
Heavy duty tensioning strap
Duct Construction
Anti-static vinyl coated polyester fabric with integrated steel helix wire
Equipotential Bond Lead
1500mm long x 1.5mm²
Duct Diameters
10cm, 20cm, 30cm, 40cm
Duct Lengths
5m & 10m
Storage
Integrated durable bag with draw string closure
Features
Carry handle and magnets fitted as standard.
Construction
Galvanised steel
Hood Dimensions
50x50cm
60x60cm
70x70cm
DUCTING DIAMETERS
Can be configured to suit 20, 30 and 40cm Ducting
Check Suitable for Hazardous Areas Zones 1 and 2
Check ATEX, IECEX, UKEX and INMETRO Certified
Check Total package
Check Completely modular and configurable
Check Fully weatherproof
Check Suitable for extreme environments
Check Lightweight and highly mobile
Check Confined Space
Check Construction
Check Nuclear
Check Ship Building
Check Ship Refit
Check Refineries
Check Chemical Plant
Check Wind Turbine
Check Maintenance

Compatibile Products & Accessories

Compatibile Products

EX 3.8KVA Transformer

View Product

EX Extension Lead

View Product

EX Splitter Unit

View Product

EX Extension Reel

View Product

Our INDUSTRIES

Trusted by industries including oil and gas, aviation, rail, biofuels, utilities and many more